Produkte > Integrierte Schaltungen (ICs) > Embedded-Prozessoren & Controller > TMS570LS3137-PGE
TI

Bilder dienen nur als Referenz, siehe Produktspezifikationen.

TMS570LS3137-PGE

Hot Sale

16/32 Bit RISC Flash MCU, Arm Cortex-R4F, EMAC, FlexRay

Hersteller : TI
Verpackung/Behälter : 144LQFP
Produkt der Kategorien : Semiconductors ; Microcontrollers (MCU) ; Hercules MCUs for functional safety
Datasheet: TMS570LS3137-PGE Datasheet (PDF)
RoHs Status: Lead free/RoHS Compliant
Lagerbestand: 0

Menge  

Angebot anfordern

Warme Tipps: Bitte füllen Sie das Formular unten und wir werden Sie so bald wie möglich kontaktieren.


TMS570LS3137-PGE Beschreibung

The TMS570LS3137device is a high-performance automotive-grade microcontroller family for safety systems. The safety architecture includes dual CPUs in lockstep, CPU and memory BIST logic, ECC on both the flash and the data SRAM, parity on peripheral memories, and loopback capability on peripheral I/Os.

The TMS570LS3137device integrates the ARM Cortex-R4F Floating-Point CPU. The CPU offers an efficient 1.66 DMIPS/MHz, and has configurations that can run up to 180MHz, providing up to 298 DMIPS. The device supports the word-invariant big-endian [BE32] format.

The TMS570LS3137-PGE device has 3MB of integrated flash and 256KB of data RAM.Both the flash and RAM have single-bit error correction and double-bit error detection. The flash memory on this device is a nonvolatile, electrically erasable, and programmable memory implemented with a 64-bit-wide data bus interface. The flash operates on a 3.3-V supply input (same level as I/O supply) for all read, program, and erase operations. When in pipeline mode, the flash operates with a system clock frequency of up to 180 MHz. The SRAM supports single-cycle read and write accesses in byte, halfword, word, and double-word modes.

The TMS570LS3137device features peripherals for real-time control-based applications, including two Next Generation High-End Timer (N2HET) timing coprocessors and two 12-bit Analog-to-Digital Converters (ADCs) supporting up to 24 inputs.

The N2HET is an advanced intelligent timer that provides sophisticated timing functions for real-time applications. The timer is software-controlled, using a reduced instruction set, with a specialized timer micromachine and an attached I/O port. The N2HET can be used for pulse-width-modulated outputs, capture or compare inputs, or GPIO. The N2HET is especially well suited for applications requiring multiple sensor information and drive actuators with complex and accurate time pulses. A High-End Timer Transfer Unit (HTU) can perform DMA-type transactions to transfer N2HET data to or from main memory. A Memory Protection Unit (MPU) is built into the HTU.

The device has two 12-bit-resolution MibADCs with 24 channels and 64 words of parity-protected buffer RAM each. The MibADC channels can be converted individually or can be grouped by software for sequential conversion sequences. Sixteen channels are shared between the two MibADCs. There are three separate groupings. Each sequence can be converted once when triggered or configured for continuous conversion mode. The MibADC has a 10-bit mode for use when compatibility with older devices or faster conversion time is desired.

The device has multiple communication interfaces: three MibSPIs, two SPIs, one LIN, one SCI, three DCANs, one I2C module, one Ethernet, and one FlexRay controller. The SPIs provide a convenient method of serial high-speed communication between similar shift-register type devices. The LIN supports the Local Interconnect standard 2.0 and can be used as a UART in full-duplex mode using the standard Non-Return-to-Zero (NRZ) format.

The DCAN supports the CAN 2.0 (A and B) protocol standard and uses a serial, multimaster communication protocol that efficiently supports distributed real-time control with robust communication rates of up to 1 Mbps. The DCAN is ideal for systems operating in noisy and harsh environments (for example, automotive vehicle networking and industrial fieldbus) that require reliable serial communication or multiplexed wiring.

The FlexRay controller uses a dual-channel serial, fixed time base multimaster communicationprotocol with communication rates of 10 Mbps per channel. A FlexRay Transfer Unit (FTU) enablesautonomous transfers of FlexRay data to and from the CPU main memory. Transfers are protected by adedicated, built-in MPU. The Ethernet module supports MII, RMII, andMDIO interfaces.

The I2C module is a multimaster communication module providing an interface between the microcontroller and an I2C-compatible device through the I2C serial bus. The I2C supports speeds of 100 and 400 Kbps.

The Frequency-Modulated Phase-Locked Loop (FMPLL) clock module is used to multiply the external frequency reference to a higher frequency for internal use. There are two FMPLL modules on this device. These modules, when enabled, provide two of the seven possible clock source inputs to the Global Clock Module (GCM). The GCM manages the mapping between the available clock sources and the device clock domains.

The device also has an External Clock Prescaler (ECP) module that when enabled, outputs a continuous external clock on the ECLK pin (or ball). The ECLK frequency is a user-programmable ratio of the peripheral interface clock (VCLK) frequency. This low-frequency output can be monitored externally as an indicator of the device operating frequency.

The DMA controller has 16 channels, 32 control packets, and parity protection on its memory. An MPU is built into the DMA to limit the DMA to prescribed areas of memory and to protect the rest of the memory system from any malfunction of the DMA.

The Error Signaling Module (ESM) monitors all device errors and determines whether an interrupt is generated or the external ERROR pin is toggled when a fault is detected. The ERROR pin can be monitored externally as an indicator of a fault condition in the microcontroller.

The External Memory Interface (EMIF) provides off-chip expansion capability with the ability to interface to synchronous DRAM (SDRAM) devices, asynchronous memories, peripherals or FPGA devices.

Several interfaces are implemented to enhance the debugging capabilities of application code. In addition to the built-in ARM Cortex-R4F CoreSight debug features, an External Trace Macrocell (ETM) provides instruction and data trace of program execution. For instrumentation purposes, a RAM Trace Port (RTP) module is implemented to support high-speed tracing of RAM and peripheral accesses by the CPU or any other master. A Data Modification Module (DMM) gives the ability to write external data into the device memory. Both the RTP and DMM have no or only minimum impact on the program execution time of the application code. A Parameter Overlay Module (POM) can reroute flash accesses to internal memory or to the EMIF. This rerouting allows the dynamic calibration against production code of parameters and tables without rebuilding the code to explicitly access RAM or halting the processor to reprogram the data flash.

With integrated safety features and a wide choice of communication and control peripherals, the TMS570LS3137-PGE device is an ideal solution for high-performance real-time control applications with safety-critical requirements.

TMS570LS3137-PGE

Feature

  • High-Performance Automotive-Grade Microcontroller for Safety-Critical Applications
    • Dual CPUs Running in Lockstep
    • ECC on Flash and RAM Interfaces
    • Built-In Self-Test (BIST) for CPU and On-chip RAMs
    • Error Signaling Module With Error Pin
    • Voltage and Clock Monitoring
  • ARM Cortex-R4F 32-Bit RISC CPU
    • Efficient 1.66 DMIPS/MHz With 8-Stage Pipeline
    • FPU With Single- and Double-Precision
    • 12-Region Memory Protection Unit (MPU)
    • Open Architecture With Third-Party Support
  • Operating Conditions
    • System Clock up to 180 MHz
    • Core Supply Voltage (VCC): 1.2 V Nominal
    • I/O Supply Voltage (VCCIO): 3.3 V Nominal
    • ADC Supply Voltage (VCCAD): 3.0 to 5.25 V
  • Integrated Memory
    • 3MB of Program Flash With ECC
    • 256KB of RAM With ECC
    • 64KB of Flash With ECC for Emulated EEPROM
  • 16-Bit External Memory Interface
  • Common Platform Architecture
    • Consistent Memory Map Across Family
    • Real-Time Interrupt (RTI) Timer OS Timer
    • 96-Channel Vectored Interrupt Module (VIM)
    • 2-Channel Cyclic Redundancy Checker (CRC)
  • Direct Memory Access (DMA) Controller
    • 16 Channels and 32 Control Packets
    • Parity Protection for Control Packet RAM
    • DMA Accesses Protected by Dedicated MPU
  • Frequency-Modulated Phase-Locked Loop (FMPLL) With Built-In Slip Detector
  • Separate Nonmodulating PLL for FlexRay
  • Trace and Calibration Capabilities
    • Embedded Trace Macrocell (ETM-R4)
    • Data Modification Module (DMM)
    • RAM Trace Port (RTP)
    • Parameter Overlay Module (POM)
  • Multiple Communication Interfaces
    • 10/100 Mbps Ethernet MAC (EMAC)
      • IEEE 802.3 Compliant (3.3-V I/O Only)
      • Supports MII, RMII, and MDIO
    • FlexRay Controller With Two Channels
      • 8KB of Message RAM With Parity Protection
      • Dedicated Transfer Unit (FTU)
    • Three CAN Controllers (DCANs)
      • 64 Mailboxes, Each With Parity Protection
      • Compliant to CAN Protocol Version 2.0B
    • Standard Serial Communication Interface (SCI)
    • Local Interconnect Network (LIN) Interface Controller
      • Compliant to LIN Protocol Version 2.1
      • Can be Configured as a Second SCI
    • Inter-Integrated Circuit (I2C)
    • Three Multibuffered Serial Peripheral Interfaces (MibSPIs)
      • 128 Words With Parity Protection Each
    • Two Standard Serial Peripheral Interfaces (SPIs)
  • Two Next Generation High-End Timer (N2HET) Modules
    • N2HET1: 32 Programmable Channels
    • N2HET2: 18 Programmable Channels
    • 160-Word Instruction RAM Each With Parity Protection
    • Each N2HET Includes Hardware Angle Generator
    • Dedicated High-End Transfer Unit (HTU) With MPU for Each N2HET
  • Two 12-Bit Multibuffered ADC Modules
    • ADC1: 24 Channels
    • ADC2: 16 Channels Shared With ADC1
    • 64 Result Buffers With Parity Protection Each
  • General-Purpose Input/Output (GPIO) Pins Capable of Generating Interrupts
    • Sixteen Pins on the ZWT Package
    • Four Pins on the PGE Package
  • IEEE 1149.1 JTAG, Boundary Scan and ARM CoreSight Components
  • JTAG Security Module
  • Packages
    • 144-Pin Quad Flatpack (PGE) [Green]
    • 337-Ball Grid Array (ZWT) [Green]

TMS570LS3137-PGE Block Diagram
(Bild: Diagram)

Technische Parameter

  • Hersteller
  • TI
  • Verpackung
  • Tape & Reel (TR)/Cut Tape (CT)/Tray/Tube
  • RoHs Status
  • Lead free/RoHS Compliant
  • Verpackung/Behälter
  • 144LQFP

TMS570LS3137-PGE Datasheet

TMS570LS3137-PGE Verwandte besondere

Ratings and Reviews

  • 0 / 5
  • 5 Stars 0%
  • 4 Stars 0%
  • 3 Stars 0%
  • 2 Stars 0%
  • 1 Stars 0%
Reviews
  • Ratings
  • Please rate the product!
Zahlung:
Zahlung
Fracht:
Fracht Mehr
Estimated Delivery Time: Feb 22 - Feb 27 days (choose Expedited at checkout).

Fracht & Zahlung

Fracht

  • Liefer-Type
  • Schiff Fee
  • Lead Time
  • $20.00-$40.00 (0.50 KG)
  • 2-5 days
  • $20.00-$40.00 (0.50 KG)
  • 3-7 days
  • $20.00-$45.00 (0.50 KG)
  • 2-5 days
  • $25.00-$65.00 (0.50 KG)
  • 2-5 days
  • $25.00-$45.00 (0.50 KG)
  • 5-14 days
  • $2.00-$3.00 (0.10 KG)
  • 7-30 days

Processing Time:Shipping fee depend on different zone and country.


Zahlung

  • Zahlungsbedingungen
  • Hand Fee
  • Payment Site
  • charge US$30.00 banking fee.
  • charge 4.0% service fee.
  • https://www.paypal.com/
  • charge 3.5% service fee.
  • charge US$0.00 banking fee.
  • https://www.westernunion.com/
  • charge US$0.00 banking fee.
  • http://global.moneygram.com/

Wir bieten qualitativ hochwertige Produkte, aufmerksamen Service und nach dem Verkauf Garantie

  • Wir haben reiche Produkte, können Ihre verschiedenen Bedürfnisse erfüllen.

    Wir haben reiche Produkte, können Ihre verschiedenen Bedürfnisse erfüllen.

  • Mindestbestellmenge beginnt 1pcs.

    Mindestbestellmenge beginnt 1pcs.

  • Niedrigsten Transportgebühr beginnt bei US $ 2,00.

    Niedrigsten Transportgebühr beginnt bei US $ 2,00.

  • 90 Tage Qualitätsgarantie für alle Produkte.

    90 Tage Qualitätsgarantie für alle Produkte.

Verpackung

  • Step1:Product

    Step1: Products

  • Step2:Vacuum packaging

    Step2: Vacuum Packaging

  • Step3:Anti-static bag

    Step3: Anti-Static Bag

  • Step4:Individual packaging

    Step4: Individual Packaging

  • Step5:Packaging boxes

    Step5: Packaging Boxes

  • Step6:bar-code shipping tag

    Step6: Bar-Code Shipping Tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Jotrin ESD packing

Garantien

1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.

FAQ:

Q: How does Jotrin guarantee that TMS570LS3137-PGE is the original manufacturer or agent of TI?
We have a professional business development department to strictly test and verify the qualifications of TI original manufacturers and agents. All TI suppliers must pass the qualification review before they can publish their TMS570LS3137-PGE devices; we pay more attention to the channels and quality of TMS570LS3137-PGE products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
Q: How to find the detailed information of TMS570LS3137-PGE chips? Including TI original factory information, Semiconductors ; Microcontrollers (MCU) ; Hercules MCUs for functional safety application, TMS570LS3137-PGE pictures?
You can use Jotrin's intelligent search engine, or filter by Semiconductors ; Microcontrollers (MCU) ; Hercules MCUs for functional safety category, or find it through TI brand manufacturer page.
Q: Are the TI's TMS570LS3137-PGE price and stock displayed on the platform accurate?
The TI's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for TMS570LS3137-PGE, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
Q: Can I place an order offline?
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online.
Q: What forms of payment can I use in Jotrin?
TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
Q: How is the shipping arranged and track my package?
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.
Q: What is the process for returns or replacement of TMS570LS3137-PGE?
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the TMS570LS3137PGE we delivered, we will accept the replacement or return of the TMS570LS3137-PGE only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of TMS570LS3137-PGE.
(3)The TMS570LS3137-PGE is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.
Q: How to contact us and get support, such as TMS570LS3137-PGE datasheet pdf, TMS570LS3137 pin diagram?
Need any After-Sales service, please feel free contact us: sales@jotrin.com

Beliebte elektronische Teile

  • TMD27713
    TMD27713 Digital Ambient Light Sensor and Proximity Sensor Digital Output 3V 8P...
  • TM1062TX3DUA
    TM1062TX3DUA Transformer Misc 1:1 20.32 X 13.72 X 4.95mm Gull Wing Surface Mount
  • TM1637
    TM1637 Chip for driving 4-digit seven-segment display .
  • TMP82C79P-2
    TMP82C79P-2 PROGRAMMABLE KEYBOARD / DISPLAY INTERFACE CMOS
  • TMP86FH47BUG
    TMP86FH47BUG 8 Bit Microcontroller TLCS-870/C Series
  • TMP82C55AP-10
    TMP82C55AP-10 CMOS PROGRAMMABLE PERIPHERAL INTERFACE

Zertifikate & Honor

Zertifikate & Honor